Definition of Pulverisation, sanitary landfill, incineration

Education. Co. ID – Pulverisation is a topic that we will discuss this time, the explanation is as follows:

What is Pulverisation

Pulverisation is one of the methods used to dispose of the waste into the high seas in a safe manner immediately, as for the waste that was thrown away, it had previously been crushed into small pieces with the same tool is modern. Thus the waste will be easier to minimize its existence.

This waste has indeed become one of the things that is very much noticed in all parts of the world, with the existence of good waste or waste management, of course it will make the environment comfortable that.

Good Waste Handling or also called “Pulverisation” can/can produce many things such as: a clean workplace, a good environment, fresh air, and can prevent the development of many disease.

To be able to handle this waste is indeed very difficult but if we want to do it together then of course it will all be easier,

Solid Waste Management

There are 2 namely Organic and Inorganic Solid Waste Confectionery, the explanation is as follows:

Solid Organic Waste Handling

Waste originating from home industries, hotels, markets, hospitals, etc. can be handled easily, however still need to remember all this waste must be distinguished according to its type, there are 3 ways that can be done that is :

• Composing Method: In this way waste such as food, animal waste, plant residues and so on can be reused to fertilize the soil after going through the composing process.
• Bio Gas Method: This method is also similar to the first method, but the difference is composting to return to the ground, while for gas it is used for alternative fuels.
• Hog Feeding Method: Is one of the handling of organic waste for animal feed, rather than decaying organic waste and cause disease, it would be better if it was given to livestock, it would be even more nutritious, right? so.

Solid Inorganic Waste Handling

4 R (replace, recycle, reuse, and reduce), the explanation is as follows

• Replace method This can be done in reducing pollution by replacing unfriendly items the environment becomes environmentally friendly, for example, using leaves as inner wrappers replace plastic.
• Recycle Method is a method of recycling inorganic waste by using special technology carried out by industry or factories in making other types of goods that can be reproduced.
• Reuse Method is to use items that should have been thrown away, for example using a broken bucket to be used as a flower pot etc.
• Reduce method is to minimize the production of waste such as buying fabric softener refills, rather than buying bottles and their contents when they run out better with refills.

With Incinerator

This incinerator is an effort to burn waste at high temperatures in a controlled manner, in this way will be able to reduce the waste by up to 80% and also the ash from the combustion can be used for other purposes other.

With Sanitary Landfill

This method may be used by the general public because this method is very simple, namely by throwing garbage in certain areas, If we look at the village, every house must have a garbage disposal in its own area, this is what is called the sanitary method landfills.

With Garbage Pressing (Reduction Mode)

By pressing solid inorganic waste, it will be able to overcome the problem of widening a garbage dump, the more the garbage is compressed, the more the trash can becomes loose.

By Destruction of Inorganic Waste (Pulverisation)

The process of destroying solid inorganic waste can be done by crushing the waste to destroyed, Below is the use of the waste later it can be used to stockpile areas or also places that have holes in them environment.

That's all and thank you for reading about the Definition of Pulverisation, Sanitary landfill, Incineration, and Mode Reduction, hopefully what is described can be useful for you. Thank you.